SadeghiSt-OngeLeblonEtAl2016

Référence

Sadeghi, Y., St-Onge, B., Leblon, B. and Simard, M. (2016) Canopy Height Model (CHM) Derived from a TanDEM-X InSAR DSM and an Airborne Lidar DTM in Boreal Forest. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 9(1):381-397. (Scopus )

Résumé

The first global X-band spaceborne single-pass interferometer mission, TanDEM-X, provides a spatially continuous map of global canopy elevations. In this paper, we assess the use of TanDEM-X data, in combination with an external digital terrain model (DTM), to map boreal canopy heights. A comparison of the TanDEM-X canopy height model (CHM) to a validated reference lidar CHM was performed based on two definitions of canopy height: canopy surface height (CSH) and dominant height (DH) at spatial resolutions ranging from 5 to 25 m, and at stand level. We found the TanDEM-X CHM to have a coarser resolution than the corresponding lidar CHM. This was apparent in the height validation of the TanDEM-X CHM, which had a RMSE of 2.7 m at the 5-m resolution, 1.9 m at the 25-m resolution, and 1.5 m at stand level. The height differences between the InSAR and lidar surfaces varied between 1.3 and 1.5 m, but InSAR heights were below the height of dominant trees by 4.6-7.5 m. Similar discrepancies were observed for the lidar CSH relatively to DH (6.04, 8.98, and 8.05 m, respectively). The results show that the TanDEM-X interferometric heights are very close to the lidar reference height and that penetration below the DH is caused by propagation of the microwave signal between the tree apices and the main foliage surface in boreal forest. Finally, the accuracy of InSAR height estimates was not sensitive to tree density effects, but was moderately affected by local incidence angles (LIAs), gap volume, and canopy height. © 2008-2012 IEEE.

Format EndNote

Vous pouvez importer cette référence dans EndNote.

Format BibTeX-CSV

Vous pouvez importer cette référence en format BibTeX-CSV.

Format BibTeX

Vous pouvez copier l'entrée BibTeX de cette référence ci-bas, ou l'importer directement dans un logiciel tel que JabRef .

@ARTICLE { SadeghiSt-OngeLeblonEtAl2016,
    AUTHOR = { Sadeghi, Y. and St-Onge, B. and Leblon, B. and Simard, M. },
    TITLE = { Canopy Height Model (CHM) Derived from a TanDEM-X InSAR DSM and an Airborne Lidar DTM in Boreal Forest },
    JOURNAL = { IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing },
    YEAR = { 2016 },
    VOLUME = { 9 },
    PAGES = { 381-397 },
    NUMBER = { 1 },
    NOTE = { cited By 0 },
    ABSTRACT = { The first global X-band spaceborne single-pass interferometer mission, TanDEM-X, provides a spatially continuous map of global canopy elevations. In this paper, we assess the use of TanDEM-X data, in combination with an external digital terrain model (DTM), to map boreal canopy heights. A comparison of the TanDEM-X canopy height model (CHM) to a validated reference lidar CHM was performed based on two definitions of canopy height: canopy surface height (CSH) and dominant height (DH) at spatial resolutions ranging from 5 to 25 m, and at stand level. We found the TanDEM-X CHM to have a coarser resolution than the corresponding lidar CHM. This was apparent in the height validation of the TanDEM-X CHM, which had a RMSE of 2.7 m at the 5-m resolution, 1.9 m at the 25-m resolution, and 1.5 m at stand level. The height differences between the InSAR and lidar surfaces varied between 1.3 and 1.5 m, but InSAR heights were below the height of dominant trees by 4.6-7.5 m. Similar discrepancies were observed for the lidar CSH relatively to DH (6.04, 8.98, and 8.05 m, respectively). The results show that the TanDEM-X interferometric heights are very close to the lidar reference height and that penetration below the DH is caused by propagation of the microwave signal between the tree apices and the main foliage surface in boreal forest. Finally, the accuracy of InSAR height estimates was not sensitive to tree density effects, but was moderately affected by local incidence angles (LIAs), gap volume, and canopy height. © 2008-2012 IEEE. },
    ART_NUMBER = { 7378861 },
    AUTHOR_KEYWORDS = { Canopy surface height (CSH); dominant height (DH); lidar CHM; TanDEM-X canopy height model (CHM) },
    DOCUMENT_TYPE = { Article },
    DOI = { 10.1109/JSTARS.2015.2512230 },
    KEYWORDS = { Forestry; Synthetic aperture radar; Vegetation, Canopy Height Models; Coarser resolution; Digital terrain model; Height estimate; Incidence angles; Interferometric height; Microwave signals; Spatial resolution, Optical radar, accuracy assessment; boreal forest; digital terrain model; forest canopy; forest cover; forest dynamics; lidar; satellite data; satellite imagery; TanDEM-X },
    OWNER = { Luc },
    SOURCE = { Scopus },
    TIMESTAMP = { 2016.08.15 },
    URL = { https://www.scopus.com/inward/record.uri?eid=2-s2.0-84954498720&partnerID=40&md5=ddca2b88d8d0b00004fc6cfead916d8a },
}

********************************************************** ***************** Facebook Twitter *********************** **********************************************************

Abonnez-vous à
l'Infolettre du CEF!

********************************************************** ************* Colloque **************************** **********************************************************

1 au 3 mai 2019
UQAC

********************************************************** ************* R à Québec 2019**************************** **********************************************************

********************************************************** ********************* Traits **************************** **********************************************************

********************************************************** ************* Écoles d'été et formation **************************** **********************************************************

Écoles d'été et formations

Cours intensif sur l'analyse des pistes 
6-10 mai 2019, Université de Sherbrooke
Cours intensif : Taxonomie et méthodes d’échantillonnage en tourbières .
6-17 mai 2019, Université Laval
Dendrochronological Fieldweek 2019 
16-21 mai 2019, Station FERLD
Traits Fonctionnels des Organismes - École thématique internationale
19 au 24 mai 2019, Porquerolles, France
Cours aux cycles supérieurs: Terrain avancé en géographie .
10 au 15 juin 2019, FERLD, Abitibi-Témiscamingue
Ecole d'été en Biologie et Ecologie intégratives 
6-12 juillet 2019, Pyrénées françaises
Cours aux cycles supérieurs: Aménagement des écosystèmes forestiers .
19-30 août 2019, Station FERLD

********************************************************** ***************** Pub - Carapace ****************** **********************************************************

********************************************************** ***************** Pub - Budworm ****************** **********************************************************

********************************************************** ***************** Pub - Colibri **************************** **********************************************************

********************************************************** ********** Pub 6 - Au coeur de l'arbre *********** **********************************************************

...Une exposition
virtuelle sur l'arbre!

********************************************************** ***************** Boîte à trucs *************** **********************************************************

CEF-Référence
La référence vedette !

Jérémie Alluard (2016) Les statistiques au moments de la rédaction .

  • Ce document a pour but de guider les étudiants à intégrer de manière appropriée une analyse statistique dans leur rapport de recherche.

Voir les autres...